Re: [T3] Windshield Wiper Motor 3-wire?

["knowonelse@sbcglobal.net" <knowonelse@sbcglobal.net>]

<x-flowed>I hooked it up per the below wiring and it works at one speed.

I took the other motor out of the armature, leaving the armature
in place as my bushings through the body are already shot.
Any replacement pieces out there?

I got to motor off, and once I cleaned up the grounding lug,
hooked it all back up, it runs at two speeds.

First rule of electrical? Check all connections, including grounds.

I'll have to re-assemble it into the armature, but at least it works.

Is there any lubrication I can do with the motor out? How?

Jeff  '67  Sqbk

William Bold wrote:
> My Henry Elfrink book has a schematic for a '66 ("1600") with three 
> wires from the wiper moter:  Black (53a, 1,5 mm), Green (53, 1,5 mm) 
> and Black/Yel (53b, 1,0 mm).  They go to the three coresponding 
> connections on the wiper switch. 


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date: 6/16/06

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>