[T3] My brakes have no bleeders! :P

[Steven Patch <nionwolf@san.rr.com>]

<x-flowed>Hey, another question.  I went to bleed the brakes on my '67 square the 
other day and came across something very strange.  There are no 
bleeders!  Someone in the past apparently replaced the rear bleeders 
with allen screws (as far as I can tell... I wasn't able to get the 
screws clean enough at the time to confirm that that's what they were.. 
but there's a button head in the same spot that my Bentley book shows a 
bleeder to be on the rear cylinders).  I can obviously put bleeders 
back there again, but on the front disks I can't find any bleeders 
ANYWHERE - even any screws or anything!  There's just the hose going in 
and that's it!  Where should I look?  The brakes work well - on the 
first pump the pedal goes nearly to the floor, but if you lift it and 
push again it's pretty firm.  I can tell a simple bleeding would make 
them work great.

Steve
'67 squareback

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

</x-flowed>