[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 30 Apr 2002, at 11:16, Daniel Baum wrote: > > A Type 3 clamp would be under the diz body on its left, pointed to > > the rear of the car. In any case it's under there somewhere. > Found it. Bentley et. al. confirmed that it is the bolt I thought it > was. It is on the left, but pointing backwards, towards the > aircleaner. I hope the w*nk*r that assembled it only put the clamp on > upside down, and not the whole distributor (or the whole engine :~) ) That sounds right, but it should be pointed to the rear, AWAY from the air cleaner. You have to reach down with an open end 10mm wrench to loosen it. The wrench just fits, between the fan housing and a rod which is the shaft for the air cooling flaps, to reach that nut. Don't overtighten the nut, it only has to be snug. It is easy to overtighten and distort the clamp. - Jim Adney, Associate Researcher Plasma Physics, 608-262-4643 University of Wisconsin, Madison ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe