[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Haynes manual gives cam journal 0.9837" - 0.9842" diameter; inlet opens 7.5deg BTDC, closes 37deg ABDC; outlet opens 44.5deg BBDC, closes 4deg ATDC. Scientific Publications (Australia) gives 1.082" - 1.083" for journal but 0.9850" - 0.9920" for pre-'66; valve timing the same except exhaust closes 1deg ATDC (a misprint?). The factory manual sides with Haynes, at 4deg ATDC, but has no further info on lift. It's the best I can do on this one, Daniel. Dave. UK VW Type 3&4 Club http://www.hallvw.clara.net/ ----- Original Message ----- From: daniel simons <dwsimons@hotmail.com> To: <type3@vwtype3.org> Sent: 28 June 1999 02:47 Subject: Re: [T3] Cam specs > All this discussion is good but is there anyone that can answer my original > question?? Can anyone give me any idea of where to look for stock cam > specs?? Any manuals have that info? ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org