Re: [T3] Distributor and breather box questions

["Daniel Baum" <daniel@type34.info>]

<x-flowed windows-1255>Thanks Russ,


> >
> The original baffle as it came from VW had a ridge around the perimeter.
> This ridge crushed when you tightened it down, and you didn't need
> gaskets. If you are reusing an old one, just put a light film of
> silicone sealer on both sides, with no gaskets. This will seal it.
> If you are using a new baffle, with the ridge, you don't need anything.

Yes it is a new baffle, and it does have the ridge. I put it all back 
together but just finger tight, and I'll tighten everything up when I put 
the fanshroud back on, which will happen after I fix that stripped thread.


Daniel 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>