Re: [T3] vdo wiring?

["cesaro suma" <cesarosumability@hotmail.com>]

<x-flowed>http://home.att.net/~howelln/tach.pdf

this is what i used for my tach, i think it is their standard tach. mine 
only had four or five wires, and they are covered here.

red - switched power from fuse block
white - i hooked to the ill. from the clock, so it dims with the dash knob.
green - negative side of coil
black - ground


> From: Wilson
> I was wondering if anyone has a VDO tach on their ride, and if so could you
> please tell me how it's wired. It's a newer tach but the directions are for
> a different unit and the web-site for vdo didn't have it either. It has
> three connectors where there is space for 8. I have tried combinations of -
> side of coil,ground, and ign. power with no results. Could some use the +
> side of the coil?

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-flowed>