[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 2 Oct 2001, at 14:31, rtvisser wrote: > Yes, its welded on the shaft. Welding is a bit difficult because you > can drain all the oil out but it's still greasy on the inside. Not > ideal circumstances. Right, I understand. But with the right equipment you can weld underwater and also weld on the outside of filled propane tanks. I think it would be likely to char up some oil inside the tube, but it could be done. I'd look for someone with a TIG welder. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/