[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 15 May 2001, at 1:23, BOB2TYPE3S@aol.com wrote: > an impact wrench takes them right off... and wont rotate the flywheel. but > DONT use it to torque it back on! > > Keith > What if you have an automatic? You can't use a KYMCO tool on them, as theres > no teeth for the tool to work. Use the same angle iron I suggested for the flywheel and drill another hole in it to bolt to the drive plate. It's the same idea, but it does take a bit of fiddling to get the bolts in there. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/