[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] re big brakes


They are 75 mms wide and 41 mm on the highest part of the wear area. The metal
is 59 mms tall over the pin holes, there are 9 mms of lining and the metal is 5
mms thick. And finally, the measurment between the outer edges of the two pin
holes is 62 mms.

I bet this pad also fits another car somewhere, but dont know which. I tried to
enter the website http://www.etf.it but it is dead. The pad for the normal 72-73
Variant and 411 caliper is the same as rear pads on all 75-90 Volvo 240s.

PerL
73 Variant L


neil verdon wrote:

> what are the measurements of these pads as the look the same size as a set i
> got by mistake when i was in halfords in england just before xmas.
> neil verdon 66 sqr on irs pan
> best among equals rise to the top.
>
> -------------------------------------------------------------------
> Pitch in!  Send your pledge of support!  mailto:support@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]