[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>I retorqued all four nuts under the valve cover. the two on cylinder 1 did fine but both studs on #2 are pulling the case savers out of the case. They are small studs. I tightend them down as much as possible and reassembled teh valves. I am just gonna drive it like that. Everything i have heard of the GEX motors is that they are junk anyways so i am not to concerned about saving the motor. I have been driving at most 3000mi since the last oil change with loose studs on #2 .I have AAA so if I break down then i will get it towed home. thanks, Bryan www.mvwe.org ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe </x-charset>