[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 15 Apr 99, at 8:15, Fuhriman, Mark wrote: > I'm replacing the rusted-out brake master cylinder on my '70 Fastback with a > new one. But the replacement unit I got from the store looks a little > different from the original. The replacement is German-made ATE brand, part > no. 311 611 015J. This is the correct replacement; it is exactly like the later MCs but is slightly different from yours. > My original MC has just one hole on the right-front side--the hole for the > RF brake line. Well, my replacement MC has TWO holes on the RF side. The > second hole is just below the hole for the RF wheel line and kind of points > down at about a 45-deg. angle. The angled outlet is supposed to feed the LF wheel. For this you need the late LF steel brake line. I have good used ones if you're interested. The two holes on the left are for the brake light switches. When you're done I don't think you'll find that there is an "extra" hole. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ************ ¼XN*********** ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe