[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In my experience there are at least two different turn signal arms for earlier type 3s. Arms intended for side marker lights have two copper contact points and a slightly larger diameter hole. They do not interchange. Tim Dapper Big Al wrote: > >It looks like the person before me pulled the whole arm to turn them on (its > >snapped right in the middle) > >Is it replaceable, do you think? > >Or do I have to do a creative gluing job... > > > > > > Well, you'll have to use an epoxy because no glue I've seen will hold it. > (Remove the switch before you epoxy it or you'll have a bigger problem) > > Try epoxying it while you look for a new one. > > You are lucky it is for a Notch, all type 3's have the same turn signal > lever (by year) except the Type 3 Ghia (a problem I was facing untill I > found a T-3 Ghia replacement lever). > > So look for a T-3 up to around (I think) '65 or 66 and the same lever > should work. > > Anyone with a '65 or '66 can confirm this? > > (I'll look up the part numbers later for you if noone confirms.) > > Big Al