Re: Got my fenders! intro

[WOODUP1@aol.com]

To Leah Wegener of Tacoma, WA.   My name is Jamie L. Woody (WOODUP1) from
Panama City FL.  I was wandering where you got your floor pans.  I need to
replace one of mine, I wouldn't mind useing fiber glass.  If you could give
an address for the company I would be very greatful.  

Now a little about me and my T3.  I am 31, In the AirForce for 13 years,
Married with two kids, daughter 9 and son 7 years old.  I bought my 71 T3 SB
for $50.00 all I had to do was put in fuel and a new coil.  At that point it
still didn't run good, I did a compression test which told me I needed to
rebuild my engine.  My wife and I pulled the engine and placed it on a work
bench right here in base housing.  I built it all stock, new everything but
the case, crank, cam, and weber dual progressive carb.
Runs graet now after many a trial and error.  The only rust has been the
rocker panels, right floor pan and the frount nose.  I had to cut the nose
off and replace it.  It worked out real well.  I drive my T3 every day to and
from work.  It has been a real neck turner for the most part.  I still need
to fix the rockers and pan, If anyone has a any ideas for my rocker and tubs
inside please fill free to let me know.  I would be very thankful.  

See Ya Lata.  Signed;  Owner of a fine VW Type-III SQ  (WOODUP1)