[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
There are little sorta pinch connectors, with a spring on the backside of one of the contacts, so you shove the wire between the two contacts and the spring keeps pressure on the wire, when you want to remove the wire you just pull it out. Its not like say, bullet connectors, though... there isnt that much force needed... you just slide the wire in. Ill see If I can get a good picture of it. Keith On 11 Sep 2006 at 20:41, Keith Park wrote: > I removed the RF fender on the crate to do that side and discovered and > INTACT original headlight connector. I was wondering when I got the notch > how the heck they were supposed to be connected to the wires and was SHOCKED > to see that the wires slip in push-on connectors!, no solder, no crimp just > a weak little spring against the contact Could you describe this a bit more? I'm don't understand what you've got there. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~