[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Testing out a coil, car not starting


<x-flowed>On 9/4/06, BOB2TYPE3S@aol.com <BOB2TYPE3S@aol.com> wrote:

Can you verify that the points are opening and closing while the engine is
turning over? If they aren't, it sounds like the rubbing block is either worn,
or missing. Just something else to check.

Points are relatively new, rubbing block's ok, and they do open and close. The moving part of the points are not continuous to ground when open.

Again, I appreciate all the leads. I'm still leaning to my coil being
in some weird failure mode.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]