[T3] Dash Electricals

["knowonelse@sbcglobal.net" <knowonelse@sbcglobal.net>]

<x-flowed>'67 Sqbk, 12v, dual Solex carbs

I have a separate 3-wire ignition switch as the second one I installed
failed. It's been too many years to remember much else that I did.
I'm trying to get this up & running for the invasion.

This concerns the dash lights that normally come on when the
ignition switch is turned to the on position prior to starting.

None of the dash lights come on in the ignition-on position.
I've assured that there is a good ground, as the dash light comes
on when the light switch is turned on.

I've been going through disconnecting and re-connecting all of
the spade connectors to get good contact as there is corrosion
all over the place.

I didn't leave any spade fittings un-connected, so any thoughts
on where to start?

Jeff '67 Sqbk


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.7.4/351 - Release Date: 5/29/06

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>