[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 29 May 2006 at 17:58, knowonelse@sbcglobal.net wrote: > '67 Sqbk, 12v, dual Solex carbs > > I have a separate 3-wire ignition switch as the second one I installed > failed. It's been too many years to remember much else that I did. > I'm trying to get this up & running for the invasion. > > This concerns the dash lights that normally come on when the > ignition switch is turned to the on position prior to starting. > > None of the dash lights come on in the ignition-on position. > I've assured that there is a good ground, as the dash light comes > on when the light switch is turned on. I believe there is a single wire which runs up to the gauge cluster that should get switched 12V. The place to start is with a voltmeter or test light, so you can verify what voltage you have, and where. Who knows, it could even be a bad switch, but you won't know unless you have some way of testing for voltage. . -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~