[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 Mar 2006 at 18:57, Rusty Rockers wrote: > 63 Notch, basically stock > > This morning I stepped on my clutch, heard a clunk and the pedal went to the > floor. The pedal does return but offers very little resistance and does not > seem to move the clutch arm far enough for me put the car in gear. I don't > see any indication that the cable has stretched. There is still a bend in > my Bowden tube (but it's held in a bent shape by a zap strap) and it doesn't > appear to have worn through anywhere. I've heard about welds braking along > the clutch tube.... Where can I look for this? Get a friend to push the pedal while you watch the Bowden tube. If the front of the Bowden tube moves, then you've got a broken weld problem, but the most likely cause is that a few strands of your cable have broken. I have new cables here. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~