[T3] Turn Signals Versus Emergency Blinkers

["knowonelse@sbcglobal.net" <knowonelse@sbcglobal.net>]

<x-flowed>I've managed to get almost all the electricals working on my '67 Sqbk.

All the external wiring seems to be in the right place, intact and I've
taken each and every connector apart, cleaned and re-assembled.

The turn signals work. The emergency flasher switch itself lights up
and flashes, but none of the external lights work. The dash lights
work with the turn signals, but not the emergency flasher.

If I turn on the emergency flasher AND the turn signals, then the
lights work.

I've gone through the Bentley wiring diagram and can't find anything
that leads me to a solution.

My thoughts are that there should be an interrupter for the turn signals
when the emergency flasher is activated. This probably is the
black/green/white wire I would think as it's common to both left
and right. If this is the case, then the problem appears to be internal
to the flasher relay unit.

Thoughts?

Jeff  '67 Sqbk


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.2/370 - Release Date: 6/20/06

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>