Re: [T3] Front end bushings and bearing

[Chris Wright <Christopher.Wright@Sun.COM>]

<x-flowed>I never realised there was any differences.  I just checked my August 64 
and the grease nipples are just inboard of the mounting clamps, the 
uppers are both in front of the centre web, the lowers are right hand in 
front of the web, left hand behind the web.
Chris

Jim Adney wrote:

> On 20 Jun 2006 at 23:16, Keith Park wrote:
>
>  
>
> > There were differences in the early beams then too, at some point
> > before 65 the upper grease fittings were OUTSIDE the beam clamps on the
> > inner part of the beam.
> >    
>
> I know that the Zerk fittings were inboard of the beam clamps on a 
> '64 that I worked on many years ago.
>
>  

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>