[T3] Full flow oil hose routing ?

[Matthew Jones <m@vw1600e.org.uk>]

<x-flowed>Where's best to run the oil hoses to an external full flow filter?

Below the heat exchanger puts it at risk of abrasion/puncture : they  
would have to loop lower than the HE gravel guards.
Between the lower HE and upper HE there is a fist sized gap, but then  
everything is very close to the head, i.e. hot, and I'd need some  
rigid bracket to keep the hoses away from the exhaust.

I've got all the fittings on the case & pump sorted out - its just the  
hoses that are left to do. (Thanks to archive & pics from Jim A. and  
Toby E. et.al.)

I've been rebuilding this engine since Feb, and it'll be going back in  
the car this weekend. Woohoo.

Thanks,

--
Matt. UK.
'73 1600e FB.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>