[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] A Tale of Two Senders
<x-flowed>I did exactly what Russ suggested with success.
Then I did a similar thing to the other connection
by soldering a wire to the brass washer (which
also soldered the center steel piece) drilling
a hole and soldering the other end to the end
of the male spade connector. Success!
Thanks, I now have a properly working gas gage.
Jeff '67 Sqbk
I soldered a small insulated wire to this spring, and drilled a small
hole thru the cast housing and threaded the wire out of the sender. I
then grounded that wire and epoxied the hole shut around the wire to
seal it. <<
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.9/382 - Release Date: 7/4/06
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
</x-flowed>