[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Thu, 2005-09-22 at 23:20, Dave Sanderson wrote: > Hi Folks > > Ok, so either I am dumb or perhaps just confused. I hooked up the > clutch cable and put the pedal cluster in. The manual says to hold > the clutch cable vertical while installing. Ok, so I did that. But > then when I let it go it falls back on the floor and releases the > cable. What keeps this from happening? I looked at the pics in the > manual and I've got the spring in the correct place. Somehow there > has to be a way of stopping the clutch pedal from falling backwards. > Thanks. > Wrap the hook and cable connection with black tape. Then if the thing gets away from you, they will stay together, and you won't have to start over. I have used bread ties, tape, ty-wraps, rubberbands, what ever is available. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~