Re: [T3] Today's work

[Scott Taylor <scottbtaylor@earthlink.net>]

<x-flowed>It is a Type 3 part. It should go on top of the tin over the left side 
cylinders (where the coil was located in some years) to route the plug 
wires. There should be a threaded hole someplace on top of the tin.

Scott Taylor
62 343


On May 10, 2005, at 8:33 AM, Daniel Baum wrote:

> > I see that you are missing some of the fittings that make for 
> > dressing the SP
> > wires neatly. There is a hole in the rear face of the right upper 
> > shroud that
> > should have a plastic clip to hold those 2 wires. There should be a 
> > bracket
> > that holds the left wires that bolts to one of the holes on top of 
> > the left
> > upper shroud. None of these are critical, but they would neaten up 
> > the wires.
>
> I've got this thing:
>
> http://www.type34.info/temp/wire%20holder.jpg
>
> but I've no idea where it goes, or even if it's really a Type 3 part.
>
> Maybe I could remove the plastic clips from it and put them somewhere 
> more useful.
>
>
> Daniel
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>