[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
What is happening is that the pot-metal housing is getting warped on these now that their so old and its binding up the shaft. If disassembly and cleaning doesnt free it up, remove the center shaft and use the emory cloth as you said to give it a little more clearance. it should turn completely freely. Keith > I've been wrestling with my AAR for some time now. > When I got the car, it was stuck mostly closed. Now > I've got it stuck mostly open. Disassembling it was > easy, and I found the "rotor" is practically an > interference fit in the housing. I orginally couldn't > turn it even using a screwdriver in the slot at the > bottom. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~