[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 25 Mar 2005 at 18:05, Russ Wolfe wrote: > I need a part for my 1500S engine. I need an oil strainer. The PROPER > one. I have purchased several from parts stores, but they are not the > right ones. All they seem to have is the late model one with the > aluminum center piece with the internal spring. That is for the 16mm oil > pickup. > There were 3 different pickups used over time. 12mm, 14mm, and 16mm. > Mine is the 14mm one. > Mine is the one shown on the left in this Bentley page, at the bottom. > http://classicvw.org/gallery/partsbook/oil_strainer I'm sure I must have one of these somewhere, but I just can't seem to find it. ISTR that I had one of the ones as pictured, but wasn't there also a later one, with the same 14mm diameter but with the spring relief valve, that was used up thru '69. I should have a couple of those, too, but I just can't seem to recall where I hid them.... -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~