[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>First, make sure it is in the alum fan housing rather than the steel >pulley housing. When I tap on the housing, the rattling seems to come from the alum. housing. >If the noise is actually in the fan housing, then it is most likely to >be a loose bolt that holds the fan housing to the case, and this bolt >probably WON'T be lying on the bottom at all. It's probably still >trapped in its depression in the front fan housing half. I think this might be the case. I drilled two 1/2" holes in the bottom of the front and rear fan housing. The magnet pulled out some steel filings, presumably from the fan, but no bolt. If the bolt is in "its depression in the front fan housing half", would it be impossible to fish out? I'm looking at the bently fig 9-4 and 9-5 but am not sure which depression you are refering to... thanks! __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~