[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
In a message dated 7/14/05 12:41:08 AM Eastern Daylight Time, comwest@att.net
writes:
<< JimA=> turn the engine CCW about 1/2 turn and then back again. The
=> noisemaker should now be stuck to the magnet
I was under the impression that there isn't really enough clearance to
get the bolt fully out of the hole with the fan in place. Am I
visualizing this wrong? >>
I don't think so. I think there's less than a 1/2 inch (13mm) of clearance
between the fan and the housing. It might actually be closer than 8mm, but I've
never checked it.
Bob 65 Notch S w/ Sunroof
71 Square, now a 2 seat Roadster, becoming a T-3 Heb, pics can be seen
at;
http://volksrods.com/forums/index.php?showtopic=2977
69 Square, currently awaiting a t-4 engine transplant
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~