[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Gettin started on the Crate!


Thanks Russ.
That explains the 211 part number on the pressure plate :)
They used that whimpy little clutch on the Bus too?  You must have had to
replace alot of them.

Keith


> > Hi Russ,
> >
> > Its a steel gasketed one.  I pulled the Clutch and it was shot... which
goes
> > along with it being a delivery vehicle but the flywheel is also bit
> > compromised from the rivits so between that and the bad teeth I think I
need
> > to put another flywheel on it.
> > You dont have a gasketed 6V flywheel do you?
>
> I will have to look tomorrow. The light is not too good in the shop
> attic.
> It should be the same as a '63 thru '65 T-2 also. If I have one, that is
> what it will be off of.
>
> -- 
> Russ Wolfe
> '71 FB AT
> '66 FB MT
> '64 T34 (not running)
> '65 T1 (not running)
> '05 KIA Sorento SUV
> russw@classicvw.org
> http://www.classicvw.org
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]