[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hi Russ, Its a steel gasketed one. I pulled the Clutch and it was shot... which goes along with it being a delivery vehicle but the flywheel is also bit compromised from the rivits so between that and the bad teeth I think I need to put another flywheel on it. You dont have a gasketed 6V flywheel do you? Keith > > I may need a 6V '65 flywheel! > > > Is it an o'ring flywheel, or steel gasket?? > The starter can spin when not completely into the flywheel. I have seen > a lot of stop and start drivers with the flywheel chewed. The bendix has > is spring loaded, and can spin when not completely engaged. Check the > shaft on the starter to see if the Bendix is going all the way to the > stop. Or, is the stop not snapped onto its snap ring. > > > -- > Russ Wolfe > '71 FB AT > '66 FB MT > '64 T34 (not running) > '65 T1 (not running) > '05 KIA Sorento SUV > russw@classicvw.org > http://www.classicvw.org > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >