[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Tue, 2005-02-15 at 22:46, David V.N. wrote: > It's kind of difficult to photograph my mods for Dells > and short CB manifolds.I simply cut the bottom of the tin > covers that were formally for around the fuel injection > intake manifold tubes.I left enough material there so that > the rubber plugs for the sparkplug wires could still seal. > I would assume that you modded a single port? On my '66, when I converted it to dual ports, I used the tin from a FI engine, and modified it a little. It worked. Jim A. may have some FI tin that could be converted to dual carb tin. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~