[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
At 07:13 PM 2/11/05, garram1@swbell.net wrote:
>That's the problem I had with my 205L ('68 FI) distributor. I've got Weber ICTs so
>there's no appropriate vacuum port. I just plugged the port on the diaphram can but
>eventually (last week) had problems with the advance not being stable. I removed
>the vacuum can and tied the vacuum advance plate in place with safety wire. So
>now I have a centrifugal advance only.
You might want to double-check on that -- I've seen ICTs with the correct port
for vacuum advance distributors.. have a pair of 'em on my Bus, in fact.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~