[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Feb 2005 at 0:14, jmailliardfleming@verizon.net wrote: > New question: Can the brass piece be extracated from the "box," in > order to reshape the wings, without damaging the box itself? I mean > are they supposed to be able to be disassembled? Once the goo is gone, the you should be able to move the brass piece to the left and then lift it straight up out of the box. It's only captured by virtue of the spring force that pushes it to the right where it can't get out. > Is there any > precaution I should take regarding current running to this piece? As long as the key is off there's no problem. > I think I will try to fix the pieces as they should be, before trying > to move the NSS to accommodate the floppy brass contact! I'll look also to see if I can come up with VW part #s for the spring and the brass contact. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~