[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I do remember the rings I had being a bit small, I had to hold them in place with a few dabs of RTV Keith > On 16 Aug 2005 at 22:06, Keith Park wrote: > > > I put the manifolds back on my SP heads on the Crate motor, and used the new > > copper rings from the gasket kit. > > > > Have I been using the carb copper rings for my rear heater boxes all these > > years? > > I doubt it. The single port copper rings are much smaller than the exhaust > ones. The exhaust ones almost fill the ID of the female thread in the HE boxes. > > -- > ******************************* > Jim Adney, jadney@vwtype3.org > Madison, Wisconsin, USA > ******************************* > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >