[T3] Oil leak-the saga continues-more advice please!

["Joel Briglia" <jbrig@enter.net>]

OK,
I spent a good 3 hours removing everything that was keeping me away from the
oil cooler. I removed all of the screws holding the shroud except one. It's
undeneath the car with the head facing up. I need a 2 foot long screwdriver
to get to it from the top and there isn't enough room underneath. It's in
pretty tight so I really need to get some leverage on it. I'm going to get
the longest screwdriver that I can and try from the top. I've already tried
drilling it out from the bottom thinking that I would replace it with a
screw that faces down. Is there an easy way around this?? I also need to
replace the screws when I put the shroud back together as I've stripped half
of them out. What size screw should I use. I want to make sure that I have
the right length and thread type. Thanks!

                                                        Joel

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Shameless link for search engines: http://listarchive.type3.org ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~