[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Okay after much prying and more than a little cussing the popouts came out without a problem. All I can say is it had to be an engineer who came up with that system to mount poputs. Thanks again for the info. Louis --- BOB2TYPE3S@aol.com wrote: > Jim A wrote: > >From inside the car, peel back the inside rubber > seal about 4" > >behind the B pillar. You will find a nut there > which you must unscrew > >to release the window. There are 2: One is at the > top and the other > >is at the bottom. > > Actually there are 4 nuts per window, 2 at the > bottom and 2 at the top. these > are 8mm nuts (tool size). The second pair is located > about 6 to 8 inches > further back from the front pair. I hope this helps. > > Bob 65 Notch S w/ Sunroof > 71 Square, now a 2 seat Roadster, pics can be > seen at; > http://volksrods.com Looking at making it a 4 seat > convertible with a Rabbit top frame. : ) > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | > mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ~ Shameless link for search engines: > http://listarchive.type3.org ~ > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail