[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 18 Oct 2004 at 19:47, K5Dar@aol.com wrote: > I've got the lights working right now. The starter switch still does not > work & it tried to cut out on me???? What did you find with the lights? Are you sure you have the wire attached to the right connector on the starter? There are 2, and only one of them is the right one. > The wiring & the fuze box do not match any > of the diagrams in my new bentley or my old bentley. By pulling one wire at a > time & checking for power at the coil, I ID'd the 15 wire at the fuze box. > But, It has a white wire attached to the same connector?? The #11 fuze wires > are connected on the connection opposite the connection that has the bar over > to the #12 fuze?? I'm going to try to take it to work tomorrow. Wish me luck. There were lots of tiny variations in the wiring, even within years. You may find that your wiring is more like a '71, however. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~