Re: [T3] Wont idle.....still

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Wont idle.....still

To: <type3@vwtype3.org>
Subject: Re: [T3] Wont idle.....still
From: "Jason Weigel" <notchboy@comcast.net>
Date: Mon, 8 Nov 2004 20:12:53 -0800
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <notchboy@comcast.net>
References: <000501c4c4ff$246c04e0$56308218@wigs> <017f01c4c5e1$732da060$6300a8c0@dad> <006601c4c608$7ca8ece0$56308218@wigs> <1099970292.4693.219.camel@blueboy>
Reply-to: type3@vwtype3.org
Resent-date: Mon, 8 Nov 2004 20:13:02 -0800 (PST)
Resent-from: type3@vwtype3.org
Resent-message-id: <N3EuGD.A.JPV.OPEkBB@cedant5.abac.com>
Resent-sender: type3-request@vwtype3.org

<x-flowed>I knew there was a way to do it. Ive just never had it explained.

Nope valves are adjusted wrong, for now. I kind of put the motor on the back burner. I have a new arivial, my 65 RHD is now parked in the front driveway!

jason


You can adjust the valves on an ACVW with only the one set of marks.
Set the engine on TDC #1. Adjust the valves on #1 and the intake on #2
and the Exhaust on #4. Now turn the engine 360 degrees and adjust the
valve on #3 and the intake on #4 and the exhaust on #2. Now you have all
the valves adjusted.

OH, BTW, what did you set your valves at on your Early T-3??? Not .006"
I hope. Early heads have the valves set at .008" intakes, and .010"
exhaust.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]