Re: [T3] dual port engine tin

[John Jaranson <jaransonT3@comcast.net>]

<x-flowed>>>
> > I doubt that the case is original however.  It is a "U" case.  Aren't
> > these the FI cases?
> The stock dual carb would have been a "T", I think.------ Yes, the book
> says that the "U" is for FI.
> This means it should have the bolt holes for the crossmember. It will
> work in either Jane or Sophy.

Yes it does have the bolt holes, but they are filled with bolts holding 
the crossmember on. <G>

BTW, Russ, the tins above the manifolds on this engine look the same as 
the FI ones I used from Jane for Sophy.  I can p-mail you a few 
pictures if you like.

Later,
John Jaranson
'66 Square (Sophy)
'71 Fasty (Jane - darkside project in waiting)
various parts.....don't we all.
http://mywebpages.comcast.net/jaransonT3/jaransonT3/
http://mywebpages.comcast.net/jaransonT3/2004Invasion/
http://mywebpages.comcast.net/jaransonT3/notavwclub/

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

</x-flowed>