[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
At 08:08 AM 7/26/04, David Sanderson wrote: >We might need to buy transmission shift rod - any suggestions on a source. Our seems to have a small bend in it. Don't try to straighten it! They're *supposed* to have a slight bend. Hold it up to the side of the tunnel, the bend should be at about the rear of the E-brake handle. >Where the shift cable comes through the pan it then goes through a bracket on the transmission. I was unable to pull the covered tube off the bracket on the transmission. Is this just a tight and corroded fit? Probably just "sticktion". Spray a bit of penetrant on there, see if you can get it to twist. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~