[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
That sounds like the door handle you're describing, wish it was!. It is the latch/Lock that I am inquiring about. It does not latch/lock anymore into the jamb, just hangs there now. Sorry if I did not make myself clear. ----- Original Message ----- From: <BOB2TYPE3S@aol.com> > > You just need to remove the screw , not take the door apart. That screw is > partly hidden by the door seal. Once you find the access hole (some have a > plastic cap over it) and then use a phillips screw driver to remove the screw. > Slide the door handle toward the front of the car and lift out. > I think the locks themselves are interchangeable, but I know the handles are > type3 specific. > Just close the door like normal, and when you need to open it from the > outside push in on the flate tab plate in there that opens the release. I hope this > helps. > > Bob 65 Notch S w/ Sunroof > 71 Square, Now a 2 seat Roadster, pics can be seen > at;http://photo.starblvd.net/bobnotch > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > > --- > [This E-mail scanned for viruses by Surfside Internet] > >