[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Bias Ply Tire - Anyone want it?


I checked that rim and another that is 
also off the car. They are both 4 1/2
and both are date stamped 12/66, which
is right for a '67.

This spare rim was hard to check, the 
stamping was very light, while the other 
stood out prominently.

Maybe the (singular) PO had been going
for a lowered look by using bug tires.

Jeff  '67 Sqbk

-----Original Message-----

Are you SURE it's a T3 rim? Late T1 and T3 
rims are the same except for the offset. 
Your T3 rims should be 4.5" wide (inside,
at the bead) and have 46mm offset. These 
numbers are actually stamped on the wheel 
center disk, between 2 lug bolt holes.

It's VERY common to find beetle wheels & 
tires which have been swapped onto type 3s, 
and not too unusual to find beetle tires 
mounted on OE type 3 wheels.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Shameless link for search engines: http://listarchive.type3.org ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]