[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hi Daniel, It's quoted as BM8 x 95 in the parts book, so its M8 and 95mm leng not including the head. I guess the B refers to the tensile strength. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "Daniel Baum" <daniel@type34.info> To: <type3@vwtype3.org> Sent: Sunday, August 22, 2004 5:01 PM Subject: Re: [T3] Engine "handle" > Russ Wolfe wrote: > > On Sun, 2004-08-22 at 10:43, Daniel Baum wrote: > > > > > > > >>I stuck a piece of stiff wire into the hole and it turns out to be 9.5cm > >>deep. Does this mean that a 10cm bolt would be right? > > > > > > That sounds about right. > > I can go measure the one on the engine I am rebuilding. > > > > Someone just let me know that the bolt it M8 x 90mm. If you can confirm > that, Russ, then I should have no trouble finding the correct bolt. > > Thanks, > > Daniel > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ~ Shameless link for search engines: http://listarchive.type3.org ~ > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > >