[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] 1967 Rear Reflector Installation


On 20 Oct 2003 at 1:42, Philip Warren wrote:

> i have a question for you 
> do you know any company that sells complete wiring harnasses for a 71 type 3 

I've parted out 2 different 71 and kept the wiring harnesses from both. With 
some effort I could pick out one that would work for you. In general, these 
cars have 4 wiring harnesses:

Front, from the fuse box forward

dash, only under the dash

rear, from the fuse box backward.

FI, engine compartment only.

You should also know that this is NOT an easy item to install. The wires go 
everywhere, many of the ends can't be installed without some disassembly of the 
car, and there are an OVERWHELMING number of wires and connections.

In general, you are better off just carefully fixing the few wire ends that 
have gone bad. A hand crimper is not adequate to make a good, long-lasting 
connection.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]