[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Daniel wrote: >The inevitable happened: One of the screws rounded out as I was trying > to remove the other drive shaft. Try hitting the edge of the bolt head with a hammer and chisel. You might also try cleaning out the bolt head so the socket will go in a little deeper, and grab the remains of the points in there (using the 12 point CV socket). Or you could use the hammer and chisel method combined with heat, since you're replacing the boot and repacking the CV's anyway. I hope this helps. Bob 65 Notch S w/ Sunroof ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org