[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Mine has apparently been replaced before as I have no such hole on the original. ----- Original Message ----- From: "Russ wolfe" <russella@prairieinet.net> To: <type3@vwtype3.org> Sent: Wednesday, May 28, 2003 1:10 AM Subject: Re: [T3] Lots of engine questions > On Tue, 2003-05-27 at 23:47, Brad wrote: > > What type of cooling hole are you refering to? Are you refering to the open > > areas around the commutator? > > > It is a round hole, about 1 1/2" in diameter, about in the middle. About > 180 degrees from the wire terminals. > If you still have the T-3 generator, re-install it, and try the > polarization sequence in the manual you have. > With that, now check see if the charging system works. > > > -- > Russ Wolfe > '66 FB MT > '71 FB AT > '65 Bug (not running) > russw@classicvw.org > http://www.classicvw.org > > > > ------------------------------------------------------------------- > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > >