[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] Lots of engine questions

To: "type3@vwtype3.org" <type3@vwtype3.org>
Subject: Re: [T3] Lots of engine questions
From: Russ wolfe <russella@prairieinet.net>
Date: 28 May 2003 00:10:20 -0500
In-reply-to: <00ad01c324d4$4e740980$8e82570c@oemcomputer>
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <russella@prairieinet.net>
References: <d.117ca942.2c0585f1@aol.com> <00ad01c324d4$4e740980$8e82570c@oemcomputer>
Reply-to: type3@vwtype3.org
Resent-date: Tue, 27 May 2003 22:10:22 -0700 (PDT)
Resent-from: type3@vwtype3.org
Resent-message-id: <KC4E0.A.5-G.-SE1-@cedant5>
Resent-sender: type3-request@vwtype3.org

On Tue, 2003-05-27 at 23:47, Brad wrote:
> What type of cooling hole are you refering to?  Are you refering to the open
> areas around the commutator?
> 
It is a round hole, about 1 1/2" in diameter, about in the middle. About
180 degrees from the wire terminals.
If you still have the T-3 generator, re-install it, and try the
polarization sequence in the manual you have.
With that, now check see if the charging system works.


-- 
Russ Wolfe
'66 FB MT
'71 FB AT 
'65 Bug (not running)
russw@classicvw.org
http://www.classicvw.org



-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

Follow-Ups:
- Re: [T3] Lots of engine questions
  - From: "Brad" <BnPWOOD2@att.net>

References:
- Re: [T3] Lots of engine questions
  - From: BOB2TYPE3S@aol.com
- Re: [T3] Lots of engine questions
  - From: "Brad" <BnPWOOD2@att.net>

Prev by Date: Re: [T3] Lots of engine questions
Next by Date: Re: [T3] Lots of engine questions
Previous by thread: Re: [T3] Lots of engine questions
Next by thread: Re: [T3] Lots of engine questions
Index(es):
- Date
- Thread