[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
--- Steven Ayres >> If these carbs are working at all, you must have > *something* installed in > the pilot jet fitting. The carbs came with > electromagnetic cutoff jets, and > these are still available although not cheap. Many > have been replaced with > passive jets, which work almost as well. Take a look > at your carb diagram > (e.g. Haynes p. 65, Fig. 3.14, item 30). Then look > at the carbs. You'll > probably see a jet screwed into that hole. Thanks for the suggestion Steve! I just checked my carbs and I am missing the idle jet (passive jet?) on my left carb. I do have one installed on the right hand side instead of the electromagnetic cutoff jet. Does anyone know where I could source out this part or maybe someone has an extra lying around? The carb model is Solex 32PDSIT -2. The jet on the right hand side has an "A" on it if that helps. Thanks, Bill Kunz 69 SQBK NYC __________________________________ Do you Yahoo!? Yahoo! Calendar - Free online calendar with sync to Outlook(TM). http://calendar.yahoo.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org