[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] install crankcase breather


On 19 Jul 2003 at 19:42, Steve Friedeck wrote:

> Does this use the metal gasket with slots in it or
> does it get a paper gasket?

Although the parts lists all show the metal gasket with the slots in it with a 
paper gasket on both sides, they all came from the factory with just the metal 
gasket. 

If you try to put all 3 in there it will stack too high for the bolts to the 
fan housing.

If you put in just a paper gasket you will blow lots of oil out the breather.

Just use the metal gasket with sealant all around both sides. be sure to orient 
it as shown in your manual.


-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]