[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> >Early rotors: 113 407 075 (66-6/71) >Late rotors: 411 407 075 (7/71-73) > >The ONLY part that is anywhere close to your number in the disk brake section >is 311 405 595 A, which is the splash shield for the early disk. > >So I don't know what you have here. Measure the disk thickness and compare that >to the new thickness in the back of the brake chapter in the bentley manual. The rotors are clearly the early Type 3 rotors. I checked my Bentley and measured the bearing seat ODs and the rotor thickness and everything matches up. I found the number I posted earlier on the box. I have posted a picture of it on the web for those interested in the minutia of the T3......should be everyone on this List if past history holds...<G>. You can see the pic at: http://mywebpages.comcast.net/jaransonT3/BrakeRotors.jpg They are Brazilian manufactured by TIPH. Thanks for all the advice. Anyone have the part numbers for the wheel bearings handy? Later, John Jaranson '71 FI AT Fasty (Jane - Darkside Project) '66 Square (Sophy - Daily Driver) About Half a Late Square (Organ Donor) http://mywebpages.comcast.net/jaransonT3/jaransonT3/ http://mywebpages.comcast.net/jaransonT3/notavwclub/ http://mywebpages.comcast.net/jaransonT3/2004Invasion/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org